PD is the name given to an electrical phenomenon is the rupture of a high voltage electrical insulation. If they occur and go unnoticed may have serious consequences. The key to preventing any possible problem is the detection and measurement. The analysis and can help avoid risks. The main reason for which these partial discharge is the aging of insulation. Under high stress levels, it is likely that the electrical insulation damage. Therefore, careful monitoring can save you a lot of time and money.
There are several reasons for the partial discharge can begin. For example, the source of the effect may be a cable or transformer. Determining the exact source of the phenomenon is crucial to implement corrective measures immediately. A commonly used method is through the detection coils in the cable end that allow accurate detection of the problem area. The data obtained with the help of measurements is processed immediately for general, in situ. The partial discharge in motors and generators can help you locate the problem in time and avoid serious financial losses. Partial discharges may occur in various types of electrical equipment.
For example, processors are vulnerable to these types of events and can be permanently damaged if partial discharges are not detected in a timely manner. Other parts of electrical equipment, such as high voltage bushings are also vulnerable to sudden disruption, and regular monitoring of the hub is highly recommended. The switches are another type of electrical equipment which tend to fail after prolonged use. The failure usually occurs in the circuit due to high flows through it. The power lines are also prone to failure, and that easily deteriorate with time. In order to properly maintain all these pieces of electrical equipment should be monitored carefully partial discharge events at all times. When choosing one, be sure to look carefully at Product specifications for Precision built to suit your requirements. Specifications such as input power, range, memory, or the maximum heart rate are very important. There is also a wide variety of special features to choose from, depending on the complexity of the task. When speaking of high voltage equipment should take into account the possibility of a breakdown caused by PD. If the problem remains unresolved the deterioration will occur until the computer is destroyed completely. The replacement of damaged equipment is very expensive and can be avoided by constant and thorough monitoring. You can find all the information you need on the extent of partial discharge in motors, generators, switches and other equipment in Amperis.com,.